Issues Entering Programming Mode on HCU for Standard Blue ROV

ROV Accessories
1

Hi everyone,

We’re having trouble with an HCU that won’t enter Programming Mode. According to the manual, the button combination ID#5 (1 + 4) should activate Programming Mode, but when we try this, the HCU just reboots. The only other valid combination we’ve found is for Flash Mode.

The HCU is connected to a Standard Blue ROV with one manipulator attached. Does anyone have tips for getting the HCU into Programming Mode? Additionally, is there a ready-made configuration file available with the manipulator already configured?

The ROV was delivered by Delta and runs on Expanse.

Any help would be greatly appreciated!

2

Hello,
The combination is too reboot but you need to hold on to button 1 when it’s booting to enter programming mode.

Cheers,
E